Breathable fabric allows moisture and heat to escape from your vehicle’s paint finish. Trapped moisture and heat buildup is damaging to your vehicle paint finish.  This is why most car covers utilize breathable fabric. 

Beware of car covers that use PVC (Polyvinyl chloride) used in pool inflatables and covers that use rigid or flexible panels encased in breathable fabric.  If the rigid or flexible panels are not breathable, then it doesn't matter what they are encased in.  These covers will not allow moisture to properly evaporate from your vehicle paint finish and will not allow heat to properly escape.  Even the mere dew point that occurs every day will create moisture under a car cover.

  The Hail Protector System uses only breathable fabric and no rigid or flexible panels.

Yes, the system was invented, developed over a five year period and continues to be extensively tested in North Texas, an area famous for high winds.  The fact that the system cinches around the wheels of the vehicle very low on the vehicle, means winds are unable to find their way under the cover.  The fact that the system installs to create an aerodynamic shape means winds also flow more easily over the cover.  The fact that the system uses constant air flow that creates an envelope of high volume air around your vehicle, means the force of winds are met with the force of the high volume air within the system. 

The cover will barely move even in winds in excess of 30 mph.  Even in winds in excess of 60 mph, there is literally no move movement whatsoever from the inner layer that rests on the vehicle.  This is due to high volume air flow inside the cover and the barrier that the outer layer provides.  Beware of the covers that do not cover your entire vehicle and then will enable winds to gather underneath the cover creating a sailing effect. 

No matter how strong the straps, a cover that allows wind to gather underneath it will have tremendous difficulty avoiding their own destruction and/or damage to your vehicle via friction of the moving layer in contact with your vehicle.  A 60 mph wind has a force of 350 pounds on a vehicle and on the cover attached to it.  Your car will be lifted off the ground by a tornado before The Hail Protector System comes off your car, when properly installed and utilized. 

Hail Storm Products has created an in depth instructional video that shows the user how to best position their vehicle in advance of severe weather. See it below.

Yes, the Hail Protector System uses high volume air, not high pressure air.  The system is designed to absorb the impact energy of hail stones.  This means that, similar to an “egg toss”, the movement of the cover enables the cover to have strength beyond the same fabric held taunt.  The generally fragile shell of an egg can avoid breakage from throws or falls of great distance when the energy created by the mass and speed of the egg is cushioned by catching the egg in a fashion that slows it down versus an abrupt stop. 

Additionally, unlike a metal knife that has much the same strength and rigidity at its tip that it does at its handle, a hail stone will have much higher strength at its core than it will have at the tip of its edges.  If you’ll ever held an icicle you’ll notice the tip breaks off rather easily, while it becomes more difficult to break as you move to the larger end.  Also, the density of a hail stone is roughly 0.6 grams per cubic centimeter, whereas the density of an ice cube from your freezer has a density of roughly 0.95 grams per cubic centimeter.  The density of a hail stone is less than an ice cube because of the air that gets trapped inside the water as it freezes due to the way in which hail stones are formed.  Density affects rigidity and strength. For this reason, the sharp edges of a hail stone are brittle. 

This coupled with the energy absorption of the Hail Protector System makes it virtually impossible for a sharp edged hail stone to penetrate the cover.

Yes, one time assembly will take roughly 20 minutes.  To make it as easy as possible, Hail Storm Products has created step by step video instructions from unpacking your system to assembly to installation and removal.

Roughly 5 minutes, without need of placing your knee on the ground.

Roughly 5 minutes, without need of placing your knee on the ground.

After installation, The Hail Protector System will repack to a size between 3 cubic feet (CAR1 size) and 5 cubic feet (SUV3 size), depending on the size of the system. The longest dimension after packing is roughly 26 inches, no matter which size system you own. Some of the smallest trunks on the market, using the CAR1 size, include the Fiat 500 at 9.5 cubic feet, leaving 6.5 cubic feet for groceries or other items, and the MINI convertible at 6 cubic feet, leaving 3 cubic feet for groceries or other items.

The smaller the vehicle, the smaller the packing and thus the smaller the space required in your trunk, hatch or truck bed. The largest size of the Hail Protector System covers the Ford F-350 Crew Cab Dually Truck. This truck is the largest production vehicle in the world. It measures 265 inches long by 100 inches wide, thus the 5 cubic feet of space required to store the system, but the ample space the vehicle provides to store the system. This truck is among the vehicles the SUV3 size Hail Protector System is designed to fit.


Hail Protector

If you have any additional questions, please feel free to contact us at

We look forward to protecting your vehicle!

Please visit our Included Accessories Page for details on the many items included with each HAIL PROTECTOR System.

The blower assembly included with each system runs continuously, when activated, due to the need for breathable fabric in any car cover. The blower assembly may be powered by one of three included power options. The three power options include a “AA” battery pack (batteries not included) that will run the system for about one hour, a car accessory plug that will run the system for three hours without depleting the starting power of your vehicle (assuming the battery in your vehicle is of reasonable health), and an AC adapter that will run the system virtually indefinitely.

From time of order to arrival at your Canadian address is typically 4 to 6 business days.

Duties/taxes/tariffs charged by customs at the receiving country will vary. For instance, one Hail Protector system shipment from the USA to Canada will typically have an average total duties and taxes of $48 USD and in-country brokerage charge of $25 USD

Another Happy Customer!

Ted from Texas with his CAR2 sized Hail Protector on his Camry